Wuxi Tain Turbocharger Co.,LTD
Precision-engineered turbochargers and parts for vehicles.
Add to Cart
49377-07052
► CHRA NO. :
49377-08930
►OE NO. :
500344801 , 5003713 , 0375F6 , 71723501
►APPLICATION :
IVECO Ducato 2.8L 92KW EURO III 2.8 92KW/ 303Nm
Fiat Jumper 2.8L 94KW 2000
Peugeot Boxer 2.8L 94KW 2000
Turbine wheels & compressor wheels size information
| Turbine Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 47 | 41.2 | 12 |
| Compressor Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 38.4 | 51 | 6/6 |
Tain supplies high-performance turbo cartridges(CHRAS) and turbo kits to aftermarket worldwide.
Originally manufactured by Honeywell(Garrett), Borg Warner(KKK), MHI(Mitsubishi), IHI, Toyota, Holset.
Model cover :
Garrett: GT12,GT14,GT15-25,GT35,GT37,GT42,T2,T3,T04B-E
KKK: K03,K04,K14,K16,K24,K27,KP35,BV39,BV40,BV45,BV50
Schwitzer: S100,S1A,S1B,S200,S2A,S2B-E,S300,S3A,S3B,S400,S410
Holset: HX30(W),HX35(W),HX40(W),HX50(W),HX55(W),HE211(W),HE35V,HE40V,HE55V
IHI: RHB3,RHF3,RHF4,RHF5,
MHI: TC04,TC06,TD02,TD03,TD04,TD05,TD06,TF035
Toyota: CT9,CT12,CT12B,CT16,CT20,CT20B,CT26
What is a Turbo CHRA?
A complete turbocharger is essentially a Centre Housing Rotating Assembly (CHRA or core assembly) with housings fitted to
each side. The turbine housing directs exhaust gas to power the turbine wheel, the compressor housing directs air into the
engine. The turbine housing will have a wastegate to control the turbine speed, or as is more common on diesel engines, there
is a variable vane mechanism giving much better control of the turbo, reducing lag, and improving performance. The wastegate
or vane mechanism is controlled by an actuator – which could be controlled either electronically or by a vacuum system.
The CHRA is a rotor (turbine wheel on one side, compressor wheel on the other) that is held in a bearing system allowing it to
rotate at high speed on a pressurized oil film similar to the engine. Turbo remanufacturer’s traditionally stripped the complete
turbocharger and CHRA, examine all the individual components, replacing these where necessary, and install brand new
bearings and seals.